Handle Claw Hammer
Handle Claw Hammer
Check out this page if you are looking for Handle Claw Hammer
 |
 Saw Claw Hammer Hi Visibility Fiberglass Handle HG16C  US $23.75
|
 Saw 16 Oz Claw Hammer Fiberglass Handle FG16C US $25.50
|
 Saw 16 Oz Smooth Face Claw Hammer Metal Handle S16C US $23.64
|
 Saw 16 Oz Claw Hammer Wood Handle HM16C US $20.35
|
 Saw 8 oz Claw Hammer Hardwood Handle M8C US $19.62
|
 A121 SIX CRAFTSMAN 14 INCH REPLACEMENT CLAW HAMMER HANDLES SECOND GRADE US $7.50
|
 Estwing E16S 16 Ounce Straight Claw Leather Handle Hammer US $39.79
|
 NWT 16 OZ FINISH CLAW HAMMER FIBERGLASS HANDLE BLUE US $24.99
|
 Neiko 16 oz 1 lb Fiberglass Handle Claw Rip Hammer US $17.99
|
 Neiko 16 oz Fiberglass Handle Claw Hammer US $18.99
|
 20OZ Fiberglass Handle Claw Hammer by Cooper 11400N US $19.79
|
 Ladies Claw Hammer Metal Handle Rubber Grip 8OZ US $6.95
|
 16OZ Wood Handle Claw Hammer by Gen Tech Intl 346276 US $6.49
|
 20 oz Claw Steel Handle Hammer by Estwing E3 20C US $42.49
|
 Central Forge 16oz Hammer W Fiberglass Handle Claw US $4.99
|
 Bravo 16 oz Claw Hammer Harwood Handle CR7602 US $9.95
|
 TRADESPRO 16 OZ CLAW HAMMER W TUBULAR HANDLE NEW 7220246 US $13.00
|
 TRADESPRO 16 OZ CLAW HAMMER W HICKORY HANDLE NEW 7220062 US $13.00
|
 16OZ Fbr Handle Claw Hammer by Gen Tech Intl 310662 US $7.79
|
 16OZ Wood Handle Claw Hammer by Gen Tech Intl 310654 US $8.29
|
 7OZ Wood Handle Claw Hammer by Gen Tech Intl 307521 US $4.79
|
 NEW K R WOOD HANDLE CLAW HAMMER 8 OZ US $5.99
|
 TRADESPRO 16 OZ CLAW HAMMER W HARDWOOD HANDLE NEW 7225159 US $10.00
|
 Vaughan EZ Swing Hickory Replacement Handle for135 Claw Scaling Hammer 61165 US $2.99
|
 11 Inch Fiberglass Handle Stanley Brand Claw Hammer US $14.99
|
 New Wooden Handled Claw Hammer 13 US $6.99
|
 16 Oz BALANCED PROFESSIONAL CLAW HAMMER W GRAPHITE CORE HANDLE RUBBER GRIP NIP US $29.99
|
What magnitude of F2 is required to apply the required 500-N force (F1) to the nail? (ignore weight of hammer)
A claw hammer is used to pull a nail out of a board. The nail is at an angle of 60 degrees to the board, and a force F1 of magnitude 500 N applied to the nail is required to pull it from the board. The hammer head contacts the board at point A, which is 0.080 m from where the nail enters the board. A horizontal force F2 is applied to the hammer handle at a distance of 0.300 m above the board.
http://session.masteringphysics.com/problemAsset/1008098/4/yf_Figure_11_30.jpg
I figured it out. The Torque on the handle is equal to the torque of the claw. So, .300m * F2=.080m * F1sin(60). F2=115N
Not enough information. Don't know the angle of the hammer handle or the location of the contact point between the claw and the nail (which may be sticking partway out from the board and would be in real life).