Chicago Rotary Parts
Chicago Rotary Parts
Check out this page if you are looking for Chicago Rotary Parts
 |
 Chicago SDS Rotary Hammer Drill 97743 PARTS PowerCord $5.99 Time Remaining: 29d 2h 3m Buy It Now for only: $5.99 |
 Chicago SDS Rotary 97743 PARTS Armature Sub Assembly $13.99 Time Remaining: 2h Buy It Now for only: $13.99 |
 Chicago SDS Rotary Hammer Drill 97743 PARTS Power Sw $8.99 Time Remaining: 29d 1h 55m Buy It Now for only: $8.99 |
 Chicago Power Tool SDS Rotary 97743 Parts New Box $6.99 Time Remaining: 16d 4h 29m Buy It Now for only: $6.99 |
 Chicago SDS Rotary 97743 PARTS Plastics Handle Cover $3.99 Time Remaining: 2h 28m Buy It Now for only: $3.99 |
 Chicago SDS Rotary 97743 PARTS Stator Sub Assembly $9.99 Time Remaining: 2h 14m Buy It Now for only: $9.99 |
 Chicago SDS Rotary 97743 PARTS Misc Accessory Bundle $3.99 Time Remaining: 2h 38m Buy It Now for only: $3.99 |
 Chicago SDS Rotary Hammer Drill 97743 PARTS Sw Knob $4.99 Time Remaining: 29d 1h 39m Buy It Now for only: $4.99 |
Shapping Pottery by Using Granulatte Pressing
Granulate pressing: As the name suggests, this is the operation of shaping pottery by pressing clay in a semi-dry and granulated condition in a mould. The clay is pressed into the mould by a porous die through which water is pumped at high pressure. The granulated clay is prepared by spray-drying to produce a fine and free-flowing material having a moisture content of between about 5 and 6 per cent. Granulate pressing, also known as dust pressing, is widely used in the manufacture of ceramic tiles and, increasingly, of plates. Injection Moulding: is a shape-forming process adapted for the tableware industry from the method long established for the forming of thermoplastic and some metal components. It has been called Porcelain Injection Moulding, or PIM. Suited to the mass production of complex-shaped articles, one significant advantage of the technique is that it allows the production of a cup, including the handle, in a single process, and thereby eliminates the handle-fixing operation and produces a stronger bond between cup and handle. The feed to the mould die is a mix of approximately 50 to 60 percent unfired body in powder form, together with 40 to 50 percent organic additives composed of binders, lubricants and plasticisers. The technique is not as widely used as other shaping methods. Jiggering and jolleying: These operations are carried out on the potter's wheel and allow the time taken to bring wares to a standardized form to be reduced. Jiggering is the operation of bringing a shaped tool into contact with the plastic clay of a piece under construction, the piece itself being set on a rotating plaster mould on the wheel. The jigger tool shapes one face while the mould shapes the other. Jiggering is used only in the production of flat wares, such as plates, but a similar operation, jolleying, is used in the production of hollow-wares such as cups. Jiggering and jolleying have been used in the production of pottery since at least the 18th century. In large-scale factory production, jiggering and jolleying are usually automated, which allows the operations to be carried out by semi-skilled labor. Roller-head machine: This machine is for shaping wares on a rotating mould, as in jiggering and jolleying, but with a rotary shaping tool replacing the fixed profile. The rotary shaping tool is a shallow cone having the same diameter as the ware being formed and shaped to the desired form of the back of the article being made. Wares may in this way be shaped, using relatively unskilled labor, in one operation at a rate of about twelve pieces per minute, though this varies with the size of the articles being produced. Developed in the U.K. just after World War II by the company Service Engineers, roller-heads were quickly adopted by manufacturers around the world; they remain the dominant method for producing flatware.
About the Author
Trisnawathi website's:
Singles Cruises
, And